The Asmodus Minikin 2 mod is a completely revamped version of the original Minikin mod. On sight, you can tell that the Minikin 2 is not like its predecessors as it even has a different chassis shape. What Asmodus did essentially was to take the best features of all its Minikin mods and added some new ideas to create the Minikin 2. This mod is a befitting successor to the widely used original Minikin 200W TC mod.
The Asmodus Minikin 2 has a compact form. It is smaller than the previous Asmodus mods in the sense that it has a rounded chassis instead of a rectangular one. With that said, the Minikin 2 comes with a similar rubberized finish as the Minikin Boost and the Minikin Reborn. The cool silicone-like finish does not only make the mod easier to hold but also gives it a premium touch. The rounded design makes the device look like the Reuleaux RX200. It is more more comfortable to hold. It also makes the mod capable of fitting large atomizers without any overhang. You can fit just about tank or RDA with a diameter of 30mm or less on the Minikin 2. There is a spring-loaded 510 connector on top of this device for fixing your atomizer. You can get this mod is various colors including army green, black, coffee, gold, pink, purple, rainbow, and white. It costs up to $100 for this mod on some sites, but you can get it on Ultimate Vape Deals for $74.99.
The Minikin 2 is powered by dual 18650 batteries which can produce up to 180 watts of power. The package does not include batteries, so you have to purchase them separately. Like other Minikin mods, the battery compartment of the mod is located on its back, and it comes with a magnetic battery door that locks in firmly. The battery life of this Asmodus mod is tremendous. You can chain vape for several hours before you have to recharge the device. There are ventilation holes under the device to keep the device from overheating.
On the front of this Asmodus mod, you will find a large stainless steel firing button which looks like that of the Minikin Boost and Minikin Reborn. The button is quite responsive. Below the firing button on the Minikin 2, you will find a one-inch touchscreen. Unlike other mods with a touchscreen, the screen of the Minikin 2 is not very large. However, it is not difficult to navigate and control the settings. The screen on this mod displays all the usual setting information.
The Minikin 2 runs on the GX-180-HT chipset. It not only supports temperature control and normal wattage mode, but you can also use the device in TCR, TFR, and temperature curve modes like the Minikin Boost and Minikin Reborn. The Minikin 2 also features a puff counter and allows you set the duration of the fire. The device works with nickel, titanium, and stainless steel coils in temperature control mode and it supports a resistance range of 0.1 ohms to 2.5 ohms. The temperature curve of the Minikin 2 works just like it does on other Minikin mods. It allows you to set a five different wattages and the length of time that the device will fire at each wattage. This feature gives you better control over your vaping than the temperature control mode.
The Asmodus Minikin 2 comes with a micro USB cable for upgrading the firmware of the mod.
Perhaps, the only con that you will find with the Minikin 2 is that it is a bit bulky. If you were to throw it in your pocket, it would create a bulge, and it is quite heavy. Another thing is that its coating can be a fingerprint magnet.
Visit Ultimate Vape Deals for incredible vaping deals on e-liquids and hardware. You can get big discounts on many other Asmodus products on the site.