Starter Kit

Starter Kit

FORZ TX80 by Vaporesso Review


FORZ TX80 by Vaporesso features a superb design with zinc alloy chassis. It is one of the most sought-after rugged devices in the market. It is available in five different color variants. You can select either Steel Blue, Imperial Red, Brick Black, Leather Brown, or Gunmetal Grey colored mod based on your preference. Most of the vapers are concerned about accidental dropping or getting their device wet. This mode is one of the very few vape mods available now featuring all-round protection such as waterproof, shockproof, and dustproof. FORZ TX80 is appealing and the leather wrapping on the chassis provided extra grip for holding in your hands. If you are a vaper, you will ask how much is FORZ TX80 at the first sight itself.

FORZ TX80 by Vaporesso is ergonomic. It is capable to withstand any complicated environment, so you can take it along with you wherever you go without getting scared about drops and falls. This IP67 rated device is tested for water resistance. You can keep it immersed in 1-meter depth water for around 30 minutes. Certainly, nothing will happen to the mod. FORZ TX80 is integrated with Axon 2.0 chipset with a new F(t) mode. This upgraded chipset with F(t) mode is capable to handle the wattage output and heating rate to create an amazingly flavorful vaping experience. It is powered by a single 18650 rechargeable battery with output power ranges from 5W to 80W.

FORZ TX80 by Vaporesso holds a bright and clear 0.69” OLED Color Screen to check the vaping data. Wattage, current resistance, temperature, mode, battery charge level, and the number of puffs can be read from the screen. Oversized fire button, up/down adjustment buttons, mode selection button can be seen very close to the screen. Type C USB port is provided to fast recharge the batteries within an hour. A rubber stopper is provided to save the USB port from dust and water. You can see the Vaporesso logo placed at the top.

FORZ TX80 by Vaporesso is introduced with FORZ 25 Tank with all-round protection including waterproof, dustproof, and shockproof. You can fill 4.5mL of e-liquid of your choice which is not bad for this kind of mod. It has a screw-to-fill function for mess-free top refilling. Tank for TPD regions is of 22mm and can hold only 2mL of e-liquid at a time. You also can use the RDA tank with this device instead of the FORZ 25 Tank. The FORZ 25 Tank is equipped with new GTR series mesh coils for enhanced vapor production. The GTR coils are fixed with antibacterial cotton wicking, larger airway, and leak-free design.

The package containing FORZ TX80 mod is very attractive. You can see a full image of the kit at the top of the box while other information like branding and inclusions is there on the backside of the box. Each pack of this mod contains FORZ TX80 Mod, FORZ 25 tank, a 0.15 Ohm GTR Mesh coil, a 0.4 Ohm GTR Mesh coil, a MicroUSB cable, a drip tip cover, a spare glass tube, spare O-rings, silicone USB plug, a FORZ badge, a screwdriver, a user manual, and a warranty card. This amazing mod is on sale at for just $69.9.

read more
Electronic-cigarettesReviewsStarter Kit

Review of G-Pen Elite Vaporizer


The G-Pen Elite from Grenco Science is one of the best vape pens on the market currently. It has an elegant and stealth appearance with some advanced features. There are two version of this device; one is suitable for vaping dry herb, and the other one is for concentrates. You cannot use this device for vaporizing oils or e-juice. The Elite bears the same marks of quality as other devices from Grenco Science. The G-Pen is a cheaper alternative to similar-sized vaporizers like the Pax 2. Although it is cheaper, this device is just as impressive. It can heat up to 428 degrees Fahrenheit in under a minute. It has a huge heating chamber, and it is easy to operate.


You will find the G-Pen Elite at any top vape store. This vaporizer usually costs about $140, but you can get it on Ejuice Pack for only $129.


The packaging design of this Grenco Science device is top-notch. It comes in a circular black box which has Grenco’s ‘G’ logo on it. Inside the box, you will find the vaporizer as well as a pen tool and a brush, a USB charger, a card grinder, and a manual. You can tell that Grenco Science pays attention to the packaging of its devices.


The Grenco G-Pen is black. It looks like a remote control or a small hair clipper. The body of the device is mainly made of plastic, so it does not get hot when you are vaping. Although this device is made of plastic, it does not feel cheap. The device has some weight to it, and it has an ergonomic shape. It sits comfortably in hand.

The Elite is a perfect device for vaping discreetly in public. It does not look like a vaporizer. You can hold this vaporizer in public without attracting many glances.


The G-Pen has a very basic design. You have the mouthpiece on top. The heating chamber sits just below the mouthpiece. You need to remove the top cap to access the heating chamber. The heating chamber of this device is made of ceramic. There are some small holes at the the chamber. You will find three buttons on the body of this vaporizer for operating it. To turn it on, you need to click the power button five times. There is a screen on the body of the Elite that shows the temperature and battery level. It is not difficult to navigate through the menu of this vaporizer and change the settings.

Heating Chamber

The Elite has a very large heating chamber for its size. You can fit up to 0.75 grams of dry herb into this device. The good thing is that the device performs excellently whether you fill the chamber or leave it partially empty. Since the heating chamber is made of ceramic, you will not get any burnt taste from the device. The G-Pen is known for producing clean vapor. The temperature range of this vaporizer is 200 to 428 degrees Fahrenheit. You can choose to view the temperature in Celsius or Fahrenheit. The device automatically stores the last temperature that you set each time you turn it off.

Battery Life

The G-Pen Elite vaporizer has a 2200 mAh battery which is non-removable. It takes about 2 to 3 hours to recharge the battery when it is empty. The battery life of this device is pretty good. It can last up to 15 vaping sessions or more. Depending on how frequent you vape, you can go for up to 72 hours before you will need to recharge it.


You will have no problems cleaning the Elite vaporizer. You simply need to turn the chamber upside and tap on the sides to remove any herb remnants. The package includes a brush that you can use to clean it.


  • Portable and ergonomic design
  • Easy to use
  • Precision temperature control
  • Large ceramic heating chamber
  • Loads of vapor and great flavor
  • Good battery life


  • Mouthpiece can get hot after prolonged use
  • Vapor can be a little warm sometimes
  • Battery is non-replaceable and the device does not support pass-through

You will find many other top-notch herb vaporizers like the G-Pen Elite on Ejuice Pack. The store sells all types of vaporizers as well as e-liquids and vaping accessories.

read more
ReviewsStarter Kit

Vaporesso Revenger 220W TC Kit With NRG Tank Review


The Revenger is the first device from Vaporesso that can produce up to 220 watts. The device runs on the OMNI board 2.0 chipset and comes with all the usual features that you expect to find in a powerful mod including temperature control. The mod has a sleek and eye-grabbing design which makes it stand out from other devices out there. This vape kit is suitable for intermediate and seasoned vapers. The device is available in three different colors; red, blue, and black.

Revenger TC Mod

The Revenger mod is made of aluminum alloy. It has an aesthetic design with curved edges. The mod looks very sleek with its glossy finish. While the finishing of the mod is very elegant, it does tend to be a fingerprint magnet. But that is not a major issue. Overall, the design of this mod is ergonomic. It has an in-mold labeling case which gives a premium feel, and it fits easily in a grip. It is lightweight. The dimensions of the device are 89mm by 45mm by 28mm.

On top of the Revenger mod, there is a stainless steel 510 threading. Unlike other mods that you will find on the market today, the 510 connection is situated in the middle of the device. This unique design means that the mod can fit some atomizers with a diameter of up to 28mm without any overhang.

There is a large square firing button on the side of the Revenger mod. The button protrudes a bit so it is easy to click and it is very responsive. You will hear a slight rattle from the firing button when you shake the device, but no other button on this device has that issue so it can be overlooked.

The Revenger TC Mod runs on dual 18650 batteries. The battery compartment is located at the back of the device. The battery door fits on tightly, and you never have to worry about it falling off. The device comes with a micro USB cable for charging it. The Revenger supports 2.5A quick charging. Also, it comes with upgradeable firmware.

On the front of the Revenger mod, there is a 0.96 inch OLED screen with two buttons below it for controlling the settings of the device. The screen is clear, and the user interface is simple to navigate.

As indicated above, this Vaporesso mod is built with the OMNI board 2.0 chipset which allows it to support temperature control and a lot of other features. You can fire the device from 5W to 220W. It can be used in normal wattage mode as well as temperature control, TCR, Bypass, and more. The mod is compatible with nickel, titanium, and stainless steel heating elements in temp control mode. It supports a temperature range of 200 to 600 degrees Fahrenheit. The resistance range of the device is 0.05 ohm to 5 ohm.

Vaporesso NRG Tank

The Vaporesso NRG is an impressive tank. It looks a little similar to the tanks in Smok’s TFV8 line. The tank is made of stainless steel and Pyrex glass. The dimensions of the NRG tank are 56mm by 26.5mm, and it weighs 66g. The tank can hold 5ml of e-juice. It has a top-filling design with a slide-and-fill mechanism like the one you will find on Smok tanks. There are two large adjustable airflow slots at the base section of the tank for controlling your vaping experience. The tank is also fitted with a unique mesh drip tip with a honeycomb-like structure that prevents spit back. To add to that, the package includes a drip tip adapter so you can use your own drip tip on the tank.

The NRG tank comes with specially designed GT Cores coils. The tank comes pre-installed with the GT8 0.15 ohm coil head. You will find the GT4 0.15 ohm coil head in the package. You can easily find replacement coil heads for this device. Vaporesso even has an optional 0.2 ohm coil head and a 0.5 ohm coil head with ceramic wicking.

The Vaporesso Revenger Starter Kit with the NRG tank is available on Premium eJuice Samples for only 99.99 CAD ($79.89).

read more
Starter Kit

Kanger Togo Mini Kit Review


The Kanger Togo Mini AIO starter kit is probably one of the most portable devices on the market today. If you are a newbie that wants to try something easy first or something really handy, then you should check this baby out.

Let’s start with its appearance and manufacturing quality. The Kanger Togo has an all-in-one design that means that it has a tank sitting on top. This may somehow feel a bit less convenient when carried around or somehow bulky when placed inside your pocket. However, it is also very easy to use, having only one button to operate.

It is made from high quality materials, manufactured with an aluminum zinc metal alloy to enhance durability, corrosion, resilience, and resistance to rust. It is durable but lightweight. It comes with a 3.8 mL tank, which is made from borosilicate Pyrex. The use of glass over plastic is a calculated move as glass has a corrosion resistance ability that deters physical tarnishing and also makes the e-juice cleaner, purer, and truer to its flavor.

Other than the user-friendly configuration, this mod is entirely leak-free as well. The cup-like formation reduces the likelihood of leaking just like other devices. Also, the top-positioned atomizer also allows mess-free and convenient coil changes. There is no need to unscrew the tank’s base this time.

Its drip tip is 510 threaded. This means that you can use your own. The coils used are the CLOCC coils, which are well-known to produce excellent flavor. For a very simple mod, the flavor was really impressive. The kit comes with two coils to cater to your vaping needs. The 0.5 ohm stainless steel coil is meant for direct lung draws, while the 1.0 ohm NiChrome coil for mouth-to-lung vaping.

As expected, the Togo Mini does not give any power flexibility. Its voltage is fixed, and your power output will mostly depend on your coil resistance and the battery power left in your device. For such set-up, the lower your battery life is, the lesser power it will deliver. Its 1,600 mAh battery is already decent enough. It can probably last you through a full day or two of vaping.

This mod is really very easy to use. It does not come with a long list of pressing combinations to familiarize or memorize. In fact, it only has one button to operate and there is no need to adjust your settings. The only thing you will probably have to remember is that you should click the mod five times to power it on or off. And once you have turned it on, just click and hold that same button to engage the coils.

And while many vapers find changing the coils and filling the tanks very difficult jobs, this will not be much of a problem with this vape. Everything can be twisted on and off smoothly and easily. The coil is also very accessible as it is attached at the end part of the tank. Overall, the mod’s entire setup is very pretty to understand. With a little tinkering and curiosity, you will surely learn to use this in a jizz. The tank is also refilled from the top, cutting the hassle even more.

Overall, the Kanger Togo Mini kit is a good investment especially for starters. It may not flaunt a lot of advanced features but beginners will surely enjoy its ease of use and quality of vapor. Furthermore, it can be helpful for cigarette smokers transitioning to vaping as well, as it can be used for mouth-to-lung draws.

Considering that it has a very low price of NZD $59,99 at, this Kanger Togo Mini Kit sure is an awesome deal. The box includes a Togo Mini mod, a CLOCC (SUS316L) 0.5 ohm, a CLOCC (NiCR) 1.0 ohm, a Pyrex glass, a user manual, and a USB cord. Colors available are black and red.

Meanwhile, a portable, all-in-one mod like the Kanger Togo deserves the best flavors of e-liquids in the market today like those from Cosmic Fog. Get a taste of its uniquely blended and thoroughly tested e-liquids at NZ Ecig Store today. There are six awesome flavors available that include Chewberry, The Shocker, Chill’d Tobacco, Kryp, Sonrise, and Sonset. A 30-ml bottle only costs NZD $24.99, the cheapest there is. Different nicotine concentration levels for each blend are also available.

read more
Starter Kit

Apollo Valiant Kit Review

Apollo Valiant Kit Review

A couple big deal bonuses about the Apollo Valiant are the fact you have now extended your options, and you can use a real “glassomizer” out of the box as opposed to those plastic tanks (boo). Most eGo situations are a bit “fixed gear bicycle” in my experience. The Apollo Valiant lets you learn how to ride a real bike, um, I mean vape.

The Apollo Valiant kit includes a Kanger Pro Tank 3 and a 1300mAh variable voltage and variable wattage battery.

read more
Starter Kit

Apollo VTube Kit V3.0

Apollo VTube Kit V3.0

It is the perfect device for those who like to fine-tune their settings and push the limits of their clearomizers and atomizers. When in variable wattage mode the VTube will automatically adjust your voltage for you even if you change the clearomizer or atomizer!

read more
Starter Kit

VaporFi Rocket Starter Kit

VaporFi Rocket Starter Kit

Incredible levels of power and technology collide to create a vaporizer that offers variable voltage, impeccable design, and an airflow tank created for the pickiest of connoisseurs.

read more
Starter Kit

VaporFi Rebel II Starter Kit

VaporFi Rebel II Starter Kit

If you’ve experienced the wonders of the Rebel, you’re going to be mind-blown by this highly advanced update on the classic. Ladies and gentlemen, the Rebel II is a game-changer. Up to 4 amps output. Ego and 510 thread compatible.

read more
Starter Kit

VaporFi Boom Vapor Hookah Starter Kit

VaporFi Boom Vapor Hookah Starter Kit

Bring the Hookah Bar with you wherever you go with the easily portable Boom Hookah. Ready to get the party started? Let’s go! The Boom Starter Kit features a boatload of power and will definitely blast your experience from mediocre to mind-blowing!

read more
Starter Kit

Apollo eGo Box Kit Review

Apollo eGo Box Kit

An Evod clearomizer, 2000 mAh battery, plus charger, is the Apollo eGo Box Kit. The thrifty little bundle comes priced comfortably at $29.95.

This is a box mod “style” kit, without any oLed display or voltage/wattage power adjustments. You push the button three times, it turns on. It has, like a lot of eGo style systems, a ten second safety switch. In other words, you can’t boil your battery and coil to a crisp. Understood to be an entry level beginner’s vape with a decent power source, I think it does fine just for its sheer convenience. You won’t have to charge it very often, and it’s discreet enough that you don’t have to feel like you’re vaping out of a juice box!

read more
1 2
Page 1 of 2